D-Link DWS-3160-24TC Cli Reference Manual page 785

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
WLAN Packets Transmitted Dropped - Displays the total packets discarded by the AP prior to
transmission on the wireless network.
WLAN Bytes Transmitted Dropped - Displays the total bytes discarded by the AP prior to
transmission on the wireless network.
Ethernet Packets Received - Displays the total packets received by the AP on the wired
network.
Ethernet Bytes Received - Displays the total bytes received by the AP on the wired network.
Ethernet Multicast Packets Received - Displays the total multicast packets received by the AP
on the wired network.
Ethernet Packets Transmitted - Displays the total packets transmitted by the AP on the wired
network.
Ethernet Bytes Transmitted - Displays the total bytes transmitted by the AP on the wired
network.
Total Transmit Errors - Displays the total transmit errors detected by the AP on the wired
network.
Total Receive Errors - Displays the total receive errors detected by the AP on the wired network.
ARP Reqs converted from Bcast to Ucast - Displays the total number of ARP request
converted from broadcast to unicast on the wireless network.
Filtered ARP Requests - Displays the total number of ARP requests filtered by the AP instead of
sending on the wireless network.
Broadcasted ARP Requests - Displays the total number of ARP requests broadcasted on the
wireless network after performing wireless ARP suppression.
Transmitted Fragment Count - Displays the count of acknowledged MPDU with an individual
address or an MPDU with a multicast address of type Data or Management.
Multicast Transmitted Frame Count - Displays the count of successfully transmitted MSDU
frames where the multicast bit is set in the destination MAC address.
Failed Count - Displays the number of times a MSDU is not transmitted successfully due to
transmit attempts exceeding either the short retry limit or the long retry limit.
Retry Count - Displays the number of time a MSDU is successfully transmitted after one or more
retries.
Multiple Retry Count - Displays the number of times a MSDU is successfully transmitted after
more than one retry.
Frame Duplicated Count - Displays the number of times a frame is received and the Sequence
Control field indicates it is a duplicate.
RTS Success Count - Displays the count of CTS frames received in response to an RTS frame.
RTS Failure Count - Displays the count of CTS frames not received in response to an RTS
frame.
ACK Failure Count - Displays the count of ACK frames not received when expected.
Received Fragment Count - Displays the count of successfully received MPDU frames of type
data or management.
Multicast Received Frame Count - Displays the count of MSDU frames received with the
multicast bit set in the destination MAC address.
FCS Error Count - Displays the count of FCS errors detected in a received MPDU frame.
Transmitted Frame Count - Displays the count of each successfully transmitted MSDU.
WEP Undecryptable Count - Displays the count of encrypted frames received and the key
configuration of the transmitter indicates that the frame should not have been encrypted or
that frame was discarded due to the receiving station not implementing the privacy option.
Client Association Failures - Displays the number of clients that have been denied association
to the VAP.
Client Authentication Failures - Displays the number of clients that have failed authentication to
the VAP.
Radar Detection Required - Displays whether the radar detection is required on some channels
in the 5 GHz band. If radar detection is required on the channel, the AP uses the 802.11h
specification to avoid interference with other wireless devices.
Radar Detected Status - Displays whether another 802.11 device was detected on the channel.
Last Radar Detected Time - Displays the amount of time that has passed since the device was
last detected on the channel.
781