Show Radius - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
<udp_port_number 1-65535> - Enter the accounting port number here. This value must be
between 1 and 65535.
default - Specifies that the default port number will be used.
timeout - (Optional) The time in second for waiting server reply. The default value is 5 seconds.
<sec 1-255> - Enter the timeout value here. This value must be between 1 and 255 seconds.
default - Specifies that the default timeout value will be used.
retransmit - (Optional) The count for re-transmitting. The default value is 2.
<int 1-20> - Enter the re-transmit value here. This value must be between 1 and 20.
default - Specifies that the default re-transmit value will be used.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure a RADIUS server:
DWS-3160-24PC:admin# config radius 1 auth_port 60
Command: config radius 1 auth_port 60
Success.
DWS-3160-24PC:admin#
4-24

show radius

Description
This command is used to display RADIUS server configurations.
Format
show radius
Parameters
None.
Restrictions
None.
Example
To display RADIUS server configurations:
57