Show Rmon - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Format
config rmon trap {rising_alarm [enable | disable] | falling_alarm [enable | disable]} (1)
Parameters
rising_alarm - (Optional) Specifies the trap state for rising alarm. The default state is enabled.
enable - Specifies that the rising alarm function will be enabled.
disable - Specifies that the rising alarm function will be disabled.
falling_alarm - (Optional) Specifies the trap state for falling alarm. The default state is enabled.
enable - Specifies that the falling alarm function will be enabled.
disable - Specifies that the falling alarm function will be disabled.
Restrictions
Only Administrators can issue this command.
Example
To configure the trap state for RMON events:
DWS-3160-24PC:admin# config rmon trap rising_alarm disable
Command: config rmon trap rising_alarm disable
Success.
DWS-3160-24PC:admin#

66-35 show rmon

Description
This command is used to display the RMON related setting.
Format
show rmon
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display the RMON related setting:
628