D-Link DWS-3160-24TC Cli Reference Manual page 85

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
5-22 delete authen server_host
Description
This command is used to delete an authentication server host.
Format
delete authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
Parameters
server_host - Server host's IP address.
<ipaddr> - Enter the server host's IP address here.
protocol - Specifies that server host's authentication protocol.
tacacs - Server host's authentication protocol.
xtacacs - Server host's authentication protocol.
tacacs+ - Server host's authentication protocol.
radius - Server host's authentication protocol.
Restrictions
Only Administrators can issue this command.
Example
To delete an authentication server host:
DWS-3160-24PC:admin# delete authen server_host 10.1.1.222 protocol tacacs+
Command: delete authen server_host 10.1.1.222 protocol tacacs+
Success.
DWS-3160-24PC:admin#
5-23 show authen server_host
Description
This command is used to display the authentication server hosts.
Format
show authen server_host
Parameters
None.
Restrictions
Only Administrators can issue this command.
81