Show Sntp; Enable Sntp - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DWS-3160-24PC:admin#
73-2

show sntp

Description
This command is used to display the SNTP current time source and configuration.
Format
show sntp
Parameters
None.
Restrictions
None.
Example
To display SNTP:
DWS-3160-24PC:admin#show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DWS-3160-24PC:admin#
73-3

enable sntp

Description
This command is used to enable the SNMP feature.
Format
enable sntp
: System Clock
: Disabled
: 10.1.1.1
: 30 sec
663