Config Vlan Vlanid - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin# config vlan v1 add tagged 4-8
Command: config vlan v1 add tagged 4-8
Success.
DWS-3160-24PC:admin#
3-6

config vlan vlanid

Description
The command is used to configure multiple VLANs at the same time. Conflicts might be generated
if you configure the name of multiple VLANs at the same time.
Format
config vlan vlanid <vidlist> {[add [tagged | untagged | forbidden] | delete] <portlist> |
advertisement [enable | disable] | name <vlan_name 32>}(1)
Parameters
vlanid - The VID list of VLANs to configure.
<vidlist> - Enter the VLAN ID list here.
add - (Optional) Specifies to add tagged, untagged or forbidden ports to the VLAN.
tagged - Specifies the additional ports as tagged.
untagged - Specifies the additional ports as untagged.
forbidden - Specifies the additional ports as forbidden.
delete - (Optional) Specifies to delete ports from the VLAN.
<portlist> - (Optional) Enter the list of ports used for the configuration here.
advertisement - (Optional) Specifies the GVRP state of this VLAN.
enable - Specifies to enable advertisement for this VLAN.
disable - Specifies to disable advertisement for this VLAN.
name - (Optional) The new name of the VLAN.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add ports, 4 to 8, to VLANs ranging from VLAN ID 10 to VLAN ID 20, as tagged ports:
DWS-3160-24PC:admin# config vlan vlanid 10-20 add tagged 4-8
Command: config vlan vlanid 10-20 add tagged 4-8
Success.
DWS-3160-24PC:admin#
28