D-Link DWS-3160-24TC Cli Reference Manual page 920

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin#config wireless wids_security client configured_probe_rate
enable
Command: config wireless wids_security client configured_probe_rate enable
Success.
DWS-3160-24PC:admin#
96-8 config wireless wids_security client known_client_database
Description
This command is used to enable or disable the test which marks the client as a rogue if it is not in
the Known Clients database.
Format
config wireless wids_security client known_client_database [enable | disable]
Parameters
enable - Specifies to enable the test which marks the client as a rogue if it is not in the Known
Clients database.
disable - Specifies to disable the test which marks the client as a rogue if it is not in the Known
Clients database. This is the default option.
Restrictions
Only Administrators can issue this command.
Example
To enable WIDS security for the known client database:
DWS-3160-24PC:admin#config wireless wids_security client known_client_database
enable
Command: config wireless wids_security client known_client_database enable
Success.
DWS-3160-24PC:admin#
96-9 config wireless wids_security client known_db_location
Description
This command is used to Specifies the location of the known client database for detected clients.
Format
config wireless wids_security client known_db_location [local | radius_server | default]
916