D-Link DWS-3160-24TC Cli Reference Manual page 853

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
<macaddr> - Enter the source MAC address of a packet here.
mask - Specifies the source MAC mask of a packet.
<macmask> - Enter the source MAC mask of a packet here.
srcip - Specifies the source IP address of a packet.
<ipaddr> - Enter the source IP address of a packet here.
srcmask - Specifies the source IP mask of a packet.
<netmask> - Enter the source IP mask of a packet here.
src_layer4_port - Specifies the source Layer 4 port of a packet, using a single keyword or
numeric notation.
domain - Specifies that the source Layer 4 port of a packet will use the service called
Domain.
echo - Specifies that the source Layer 4 port of a packet will use the service called
Echo.
ftp - Specifies that the source Layer 4 port of a packet will use the service called FTP.
ftpdata - Specifies that the source Layer 4 port of a packet will use the service called
FTP Data.
http - Specifies that the source Layer 4 port of a packet will use the service called
HTTP.
smtp - Specifies that the source Layer 4 port of a packet will use the service called
SMTP.
snmp - Specifies that the source Layer 4 port of a packet will use the service called
SNMP.
telnet - Specifies that the source Layer 4 port of a packet will use the service called
TELNET.
tftp - Specifies that the source Layer 4 port of a packet will use the service called TFTP.
other - Specifies that a custom source Layer 4 port number will be used.
<int 0-65535> - Enter the custom source Layer 4 port number of a packet here. This
value must be between 0 and 65535.
vlan - Specifies the Layer 2 VLAN Identifier field value (the only tag in a single tagged
packet or the first or outer tag of a double VLAN tagged packet).
<vlanid 1-4095> - Enter the VLAN ID used here. This value must be between 1 and
4095.
ipv6 - Specifies that the Layer 3 protocol, for this class, is IPv6.
any - Specifies that all packets will be considered to belong to the class.
dstipv6 - Specifies the destination IPv6 address of a packet.
<ipv6addr> - Enter the destination IPv6 address of a packet here.
prefix_length - Specifies the destination IPv6 prefix length of a packet.
<int 1-128> - Enter the destination IPv6 prefix length of a packet here. This value must
be between 1 and 128.
dst_layer4_port - Specifies the destination Layer 4 port of a packet, using a single
keyword or numeric notation.
domain - Specifies that the destination Layer 4 port of a packet will use the service
called Domain.
echo - Specifies that the destination Layer 4 port of a packet will use the service called
Echo.
ftp - Specifies that the destination Layer 4 port of a packet will use the service called
FTP.
ftpdata - Specifies that the destination Layer 4 port of a packet will use the service
called FTP Data.
http - Specifies that the destination Layer 4 port of a packet will use the service called
HTTP.
smtp - Specifies that the destination Layer 4 port of a packet will use the service called
SMTP.
snmp - Specifies that the destination Layer 4 port of a packet will use the service called
SNMP.
telnet - Specifies that the destination Layer 4 port of a packet will use the service called
TELNET.
tftp - Specifies that the destination Layer 4 port of a packet will use the service called
TFTP.
other - Specifies that a custom destination Layer 4 port number will be used.
849