D-Link DWS-3160-24TC Cli Reference Manual page 27

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Format
show ports {<portlist>} {[description | err_disabled | details | media_type]}
Parameters
ports - Specifies a range of ports to be displayed.
<portlist> - (Optional) Enter the list of ports to be configured here.
description - (Optional) Indicates if port description will be included in the display .
err_disabled - (Optional) Indicates if ports are disabled by some reasons will be displayed.
details - (Optional) Displays the port details.
media_type - (Optional) Displays port transceiver type.
Restrictions
None.
Example
To display the port details:
DWS-3160-24PC:admin#show ports details
Command: show ports details
Port : 1
--------------------
Port Status
Description
HardWare Type
MAC Address
Bandwidth
Auto-Negotiation
Duplex Mode
Flow Control
MDI
Address Learning
Last Clear of Counter
BPDU Hardware Filtering Mode: Disabled
Queuing Strategy
TX Load
RX Load
CTRL+C ESC q Quit
: Link Down
:
: Gigabits Ethernet
: 00-11-22-33-45-77
: 1000000Kbit
: Enabled
: Full Duplex
: Disabled
: Auto
: Enabled
: 0 hours 5 mins ago
: FIFO
: 0/100,
: 0/100,
SPACE n Next Page p
0 bits/sec,
0 bits/sec,
Previous Page r Refresh
23
0 packets/sec
0 packets/sec