Show Vlan - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin# config gvrp 1-5 state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Command: config gvrp 1-5 state enable ingress_checking enable acceptable_frame
tagged_only pvid 2
Success
DWS-3160-24PC:admin# config port_vlan 1-5 gvrp_state enable ingress_checking
enable acceptable_frame tagged_only pvid 2
Command: config port_vlan 1-5 gvrp_state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Success
DWS-3160-24PC:admin#
3-8

show vlan

Description
This command is used to display VLAN information, including parameters settings and operational
values.
Format
show vlan {<vlan_name 32>}
Parameters
vlan - Specifies the VLAN to be displayed.
<vlan_name 32> - (Optional) Enter the VLAN name here. The VLAN name can be up to 32
characters long.
Restrictions
None.
Example
To display the VLAN settings:
30