Chapter 35 Ipv6 Neighbor Discover Command List - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Chapter 35 IPv6 Neighbor Discover
create ipv6 neighbor_cache ipif <ipif_name 12> <ipv6addr> <macaddr>
delete ipv6 neighbor_cache ipif [<ipif_name 12> | all] [<ipv6addr> | static | dynamic | all]
show ipv6 neighbor_cache ipif [<ipif_name 12> | all] [ipv6address <ipv6addr> | static | dynamic |
all]
config ipv6 nd ns ipif <ipif_name 12> retrans_time <millisecond 0-4294967295>
show ipv6 nd {ipif <ipif_name 12>}
35-1 create ipv6 neighbor_cache
Description
This command is used to create a static neighbor on an IPv6 interface.
Format
create ipv6 neighbor_cache ipif <ipif_name 12> <ipv6addr> <macaddr>
Parameters
ipif - Specifies the interface's name.
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
<ipv6addr> - The address of the neighbor.
<macaddr> - The MAC address of the neighbor.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. )
Example
Create a static neighbor cache entry:
DWS-3160-24PC:admin#create ipv6 neighbor_cache ipif System 3FFC::1 00-11-22-33-
44-55
Command: create ipv6 neighbor_cache ipif System 3FFC::1 00-11-22-33-44-55
Success.
DWS-3160-24PC:admin#
Command List
380