D-Link DWS-3160-24TC Cli Reference Manual page 89

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
5-28 config admin local_enable
Description
This command is used to configure the local enable password of administrator level privilege.
When the user chooses the "local_enable" method to promote the privilege level, the enable
password of local device is needed. When the password information is not specified in the
command, the system will prompt the user to input the password interactively. For this case, the
user can only input the plain text password. If the password is present in the command, the user
can select to input the password in the plain text form or in the encrypted form. The encryption
algorithm is based on SHA-I.
Format
config admin local_enable
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To configure the administrator password:
DWS-3160-24PC:admin# config admin local_enable
Command: config admin local_ebable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DWS-3160-24PC:admin#
85