Show Switch - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
12-5

show switch

Description
This command is used to display the Switch information.
Format
show switch
Parameters
None.
Restrictions
None.
Example
The following is an example for display of Switch information.
DWS-3160-24PC:admin#show switch
Command: show switch
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version
Firmware Version
Hardware Version
System Name
System Location
System Uptime
System Contact
Spanning Tree
GVRP
IGMP Snooping
MLD Snooping
VLAN Trunk
Telnet
Web
SNMP
SSL Status
CTRL+C ESC q Quit
: DWS-3160-24PC Gigabit Ethernet Switch
: 00-01-02-03-04-00
: 10.90.90.90 (Manual)
: default
: 255.0.0.0
: 0.0.0.0
: Build 1.00.001
: Build 1.00.034
: A1
:
:
: 0 days, 3 hours, 0 minutes, 36 seconds
:
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled (TCP 23)
: Enabled (TCP 80)
: Disabled
: Disabled
SPACE n Next Page ENTER Next Entry a
138
All