Chapter 91 Wireless Provisioning And Mutual Authentication Command List - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Chapter 91 Wireless Provisioning and
delete wireless ap_provisioning [<macaddr> | all]
config wireless ap_provision [<macaddr> [switch [primary | backup] <ipaddr> | profile [<int 1-16>
| default] | start] | all start]
config wireless certificate_generate
config wireless certificate_request peer <ipaddr> start
config wireless cluster exchange_certificate
config wireless mutual_authentication_mode [enable | disable]
config wireless re_provisioning_unmanaged [enable | disable]
config wireless switch_provisioning [[enable | disable] | peer <ipaddr> start]
show wireless ap_provisioning {<macaddr>}
show wireless certificate_request
show wireless switch_provisioning
91-1 delete wireless ap_provisioning
Description
This command is used to remove the specified AP from the AP provisioning list or removes all APs
from the AP provisioning list.
Format
delete wireless ap_provisioning [<macaddr> | all]
Parameters
<macaddr> - Enter the MAC Address of the AP here.
all - Specifies that all the APs will be removed from the AP provisioning list.
Restrictions
Only Administrators can issue this command.
Example
To delete a specified AP from the provisioning list:
DWS-3160-24PC:admin#delete wireless ap_provisioning 00-22-B0-3C-43-C0
Command: delete wireless ap_provisioning 00-22-B0-3C-43-C0
Success.
DWS-3160-24PC:admin#
To delete all entries from the provisioning list:
Mutual Authentication
Command List
808