Chapter 20 Connectivity Fault Management (Cfm) Extension Command List; Config Cfm Ais - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Chapter 20 Connectivity Fault
config cfm ais md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> | ma_index
<uint 1-4294967295>] mepid <int 1-8191> {period [1sec | 1min] | level <int 0-7> | state
[enable | disable]}
config cfm lock md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> | ma_index
<uint 1-4294967295>] mepid <int 1-8191> {period [1sec | 1min] | level <int 0-7> | state
[enable | disable]}
cfm lock md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> | ma_index <uint 1-
4294967295>] mepid <int 1-8191> remote_mepid <int 1-8191> action [start | stop]
config cfm ccm_fwd [software | hardware]
show cfm ccm_fwd
20-1

config cfm ais

Description
This command is used to configure the parameters of AIS function on a MEP. The default client
MD level is MD level at which the most immediate client layer MIPs and MEPs exist.
NOTE: This default client MD level is not a fixed value. It may change when creating
or deleting higher level MDs and MAs on the device.
When the most immediate client layer MIPs and MEPs do not exist, the default client MD level
cannot be calculated. If the default client MD level cannot be calculated and user doesn't
designate a client level, the AIS and LCK PDU cannot be transmitted.
Format
config cfm ais md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> | ma_index
<uint 1-4294967295>] mepid <int 1-8191> {period [1sec | 1min] | level <int 0-7> | state
[enable | disable]}
Parameters
md - Specifies the maintenance domain name.
<string 22> - Enter the maintenance domain name here. This name can be up to 22
characters long.
md_index – (Optional) Specifies the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must
between 1 and 4294967295.
ma - Specifies the maintenance association name.
<string 22> - Enter the maintenance association name here. This name can be up to 22
characters long.
ma_index – (Optional) Specifies the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value must
between 1 and 4294967295.
Management (CFM)
Extension Command List
237