D-Link DWS-3160-24TC Cli Reference Manual page 856

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
92-13 config wireless diffserv policy_map
Description
This command is used to configure the related parameters of Policy Map Wireless DiffServ.
Format
config wireless diffserv policy_map <name 1-31> [rename <name 1-31> |
add_class_member <name 1-31> | del_class_member <name 1-31> | class <name 1-31>
action [drop | mark [cos <value 0-7> | ip_dscp [af11 | af12 | af13 | af21 | af22 | af23 | af31 |
af32 | af33 | af41 | af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef] |
ip_precedence <value 0-7>] | police_simple [color_blind committed_rate <uint 1-
4294967295> committed_burst_size <int 1-128> conform_action [drop | set_prec_transmit
<value 0-7> | set_dscp_transmit [af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41
| af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef] | set_cos_transmit <value 0-
7> | send]]]]]
Parameters
policy_map - Specifies the name of an existing wireless DiffServ policy.
<name 1-31> - Enter the name of an existing wireless DiffServ policy here. This name can be
up to 31 characters long.
rename - Specifies to change the name of an existing wireless DiffServ policy.
<name 1-31> - Enter the name of an existing wireless DiffServ policy here. This name can
be up to 31 characters long.
add_class_member - Specifies to create an instance of a class definition within the specified
policy for the purpose of defining treatment of the traffic class through subsequent policy
attribute statements. This command causes the specified policy to create a reference to
the class definition.
<name 1-31> - Enter the name of the class member here. This name can be up to 31
characters long.
del_class_member - Specifies to delete the instance of a particular class and its defined
treatment from the specified policy. This command removes the reference to the class
definition for the specified policy.
<name 1-31> - Enter the name of the class member here. This name can be up to 31
characters long.
class - Specifies the name of an existing wireless DiffServ class.
<name 1-31> - Enter the name of an existing wireless DiffServ class here.
action - Specifies the traffic conditioning actions, such as policing and marking, to apply to
traffic classes.
drop - Specifies that all packets for the associated traffic stream are to be dropped at the
ingress.
mark cos - Specifies to mark all packets for the associated traffic stream with the specified
class of service value in the priority field of the 802.1p header. If the packet does not
already contain this header, one is inserted.
<value 0-7> - Enter the CoS mark value used here. This value must be between 0 and
7.
ip_dscp - Specifies to mark all packets, of the associated traffic stream, with the specified
IP DSCP value.
af11 - Specifies that the DiffServ Code Point (DSCP) field value will be set to 'af11'.
af12 - Specifies that the DiffServ Code Point (DSCP) field value will be set to 'af12'.
af13 - Specifies that the DiffServ Code Point (DSCP) field value will be set to 'af13'.
af21 - Specifies that the DiffServ Code Point (DSCP) field value will be set to 'af21'.
af22 - Specifies that the DiffServ Code Point (DSCP) field value will be set to 'af22'.
af23 - Specifies that the DiffServ Code Point (DSCP) field value will be set to 'af23'.
af31 - Specifies that the DiffServ Code Point (DSCP) field value will be set to 'af31'.
af32 - Specifies that the DiffServ Code Point (DSCP) field value will be set to 'af32'.
852