D-Link DWS-3160-24TC Cli Reference Manual page 639

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin# config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK !!!
SIM Configure Success !!!
Success.
DWS-3160-24PC:admin#
67-6 config sim
Description
This command is used to configure the role state and the parameters of the discovery protocol on
the Switch.
Format
config sim [{[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-
90> | hold_time <sec 100-255>}]
Parameters
commander - (Optional) Specifies to transfer the role to the commander.
group_name - (Optional) Specifies that if the user is the commander, the user can update the
name of group.
<groupname 64> - Enter the group name here. This name can be up to 64 characters long.
candidate - (Optional) Specifies to transfer the role to the candidate.
dp_interval - (Optional) The time in seconds between discoveries.
<sec 30-90> - Enter the discovery time here in seconds. This value must be between 30 and
90 seconds.
hold_time - (Optional) The time in seconds the device holds the discovery result.
<sec 100-255> - Enter the hold time here in seconds. This value must be between 100 and
255.
Restrictions
Only Administrators can issue this command.
Example
To transfer to commander:
DWS-3160-24PC:admin# config sim commander
Command: config sim commander
Success.
DWS-3160-24PC:admin#
To transfer to candidate:
635