Chapter 12 Basic Commands Command List; Create Account - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Chapter 12 Basic Commands Command
create account [admin | operator | power_user | user] <username 15> {encrypt [plain_text |
sha_1] <password>}
config account <username> {encrypt [plain_text | sha_1] <password>}
show account
delete account <username>
show switch
enable telnet {<tcp_port_number 1-65535>}
disable telnet
enable web {<tcp_port_number 1-65535>}
disable web
reboot {force_agree}
reset {[config | system]} {force_agree}
config firmware image <path_filename 64> boot_up
create ipif <ipif_name 12> {<network_address>} <vlan_name 32> {secondary | state [enable |
disable] | proxy_arp [enable | disable] {local [enable | disable]}}
config ipif <ipif_name 12> [{ipaddress <network_address> | vlan <vlan_name 32> | proxy_arp
[enable | disable] {local [enable | disable]} | state [enable | disable]} | bootp | dhcp |ipv6
[ipv6address <ipv6networkaddr> | state [enable | disable]] | ipv4 state [enable | disable]]
delete ipif [<ipif_name 12> {ipv6address <ipv6networkaddr>} | all]
enable ipif [<ipif_name 12> | all]
disable ipif [<ipif_name 12> | all]
show ipif {<ipif_name 12>}
enable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
show ipif_ipv6_link_local_auto {<ipif_name 12>}
12-1

create account

Description
This command is used to create user accounts. It is case sensitive. The number of account
(include admin and user) is up to 8.
Format
create account [admin | operator | power_user | user] <username 15> {encrypt [plain_text |
sha_1] <password>}
Parameters
admin - Specifies the name of the admin account.
operator - Specifies the name for a operator user account.
power_user – Specifies the name for a Power-user account.
user - Specifies the name of the user account.
<username 15> - Enter the username used here. This name can be up to 15 characters long.
encrypt - (Optional) Specifies the encryption applied to the account.
plain_text - Select to Specifies the password in plain text form.
sha_1 - Select to Specifies the password in the SHA-I encrypted form.
<password> - The password for the user account. The length for of password in plain-text
List
134