Chapter 36 Ipv6 Route Command List - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide

Chapter 36 IPv6 Route Command List

create ipv6route [default] [<ipif_name 12> <ipv6addr> |<ipv6addr>] {<metric 1-65535>} {[primary |
backup]}
delete ipv6route [default] [<ipif_name 12> <ipv6addr> | <ipv6addr> | all]
show ipv6route
36-1 create ipv6route
Description
This command is used to create an IPv6 default route. If the next hop is a global address, it is not
needed to indicate the interface name. If the next hop is a link local address, then the interface
name must be specified.
Format
create ipv6route [default] [<ipif_name 12> <ipv6addr> |<ipv6addr>] {<metric 1-65535>}
{[primary | backup]}
Parameters
default - Specifies the default route.
<ipif_name 12> - Specifies the interface for the route. This name can be up to 12 characters
long.
<ipv6addr> - Specifies the next hop address for this route.
<metric 1-65535> - Enter the metric value here. The default setting is 1. This value must
between 1 and 65535.
primary - Specifies the route as the primary route to the destination.
backup - Specifies the route as the backup route to the destination. The backup route can only
be added when the primary route exists. If the route is not specified as the primary route or the
backup route, then it will be auto-assigned by the system. The first created is the primary, the
second created is the backup.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create and IPv6 route:
DWS-3160-24PC:admin# create ipv6route default System 3FFC:: 1 primary
Command: create ipv6route default System 3FFC:: 1 primary
Success.
DWS-3160-24PC:admin#
384