Show Snmp User; Create Snmp Group - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
66-6

show snmp user

Description
This command is used to display information on each SNMP username in the group username
table.
Format
show snmp user
Parameters
None.
Restrictions
None.
Example
To display SNMP user:
DWS-3160-24PC:admin#show snmp user
Command: show snmp user
Username
--------------------------------
initial
user123
Total Entries: 2
DWS-3160-24PC:admin#
66-7

create snmp group

Description
This command is used to create a new SNMP group, or a table that maps SNMP users to SNMP
views.
Format
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
{read_view <view_name 32> | write_view <view_name 32> | notify_view <view_name 32>}
Parameters
group - Specifies the name of the group.
Group Name
--------------------------------
initial
group123
609
VerAuthPriv
-----------
V3 NoneNone
V3 MD5 DES