D-Link DWS-3160-24TC Cli Reference Manual page 273

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
23-2 config dhcp_local_relay vlan vlanid
Description
This command is used to enable or disable DHCP local relay function for specified VLAN ID.
Format
config dhcp_local_relay vlan vlanid <vlan_id> state [enable | disable]
Parameters
vlanid - Specifies the VLAN ID that the DHCP local relay function will be enabled.
<vlan_id> - Enter the VLAN ID used here.
state - Enable or disable DHCP local relay for specified vlan.
enable - Specifies that the DHCP local relay function will be enabled.
disable - Specifies that the DHCP local relay function will be disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable DHCP local relay for default VLAN:
DWS-3160-24PC:admin# config dhcp_local_relay vlan vlanid 1 state enable
Command: config dhcp_local_relay vlan vlanid 1 state enable
Success.
DWS-3160-24PC:admin#
23-3 enable dhcp_local_relay
Description
This command is use to globally enable the DHCP local relay function on the Switch.
Format
enable dhcp_local_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
269