D-Link DWS-3160-24TC Cli Reference Manual page 180

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin#show captive_portal configuration 1 status
Command: show captive_portal configuration 1 status
CP ID
CP Name
CP Mode
Protocol Mode
Verification Mode
Group ID
Group Name
User Logout Mode
URL Redirect Mode
Redirect URL
Session Timeout
Idle Timeout
Max Bandwidth Up (bytes/sec)
Max Bandwidth Down (bytes/sec)
Max Input Octets (bytes)
Max Output Octets (bytes)
Max Total Octets (bytes)
DWS-3160-24PC:admin#
To display the locales for the Captive Portal configuration 1:
DWS-3160-24PC:admin#show captive_portal configuration 1 locales
Command: show captive_portal configuration 1 locales
Locale Code
---------------
en
DWS-3160-24PC:admin#
To display the client's status which authenticated to the Captive Portal configuration 1:
DWS-3160-24PC:admin#show captive_portal configuration 1 client
Command: show captive_portal configuration 1 client
CP ID
CP Name
No Captive Portal clients exist.
DWS-3160-24PC:admin#
In the above examples the following display parameters can be noticed:
CP ID - Displays the Captive Portal ID.
CP Name - Displays the Captive Portal name.
Operational Status - Displays whether the Captive Portal is enabled or disabled.
Disable Reason - If the Captive Portal is disabled, this field indicates the reason.
Blocked Status - Displays the blocked status, which is Blocked or Not Blocked.
: 1
: Training
: Enable
: HTTPS
: Local
: 2
:
: Enable
: Enable
: http://www.company.com
: 1200
: 0
: 0
: 102400
: 0
: 0
: 0
: 1
: Training
176