D-Link DWS-3160-24TC Cli Reference Manual page 838

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Format
config wireless access_list ip standard <int 1-99> [add_rule <value 1-12> type [deny | permit]
match_every [true | false {srcip <ipaddr> srcmask <netmask>}] | del_rule <value 1-12> |
edit_rule <value 1-12> [type [deny | permit] | match_every [true | false] | srcip <ipaddr>
srcmask <netmask>]]
Parameters
standard - Specifies to configure a standard IP ACL, identified by the ACL number.
<int 1-99> - Enter the standard IP ACL number, used, here. This value must be between 1
and 99.
add_rule - Specifies to create a new rule for a standard IP ACL.
<value 1-12> - Enter the new rule number for the new standard IP ACL here. This number
must be between 1 and 12.
type - Specifies what action should be taken if a packet matches the rule's criteria. The
possible values are Permit or Deny.
deny - Specifies that the action that will take place, if a packet matches the rule's criteria, is
deny.
permit - Specifies that the action, that will take place, if a packet matches the rule's criteria,
is permit.
match_every - Specifies to match every packet. Valid values are true or false.
true - Specifies that every packet is considered to match the selected ACL Rule.
false - Specifies that it is not mandatory for every packet to match the selected ACL Rule.
srcip - Specifies the source IP address of the IP ACL rule.
<ipaddr> - Enter the source IP address, of the IP ACL rule, here.
srcmask - Specifies the source netmask of the IP ACL rule.
<netmask> - Enter the source netmask, of the IP ACL rule, here.
del_rule - Specifies to delete a specified rule from a standard IP ACL.
<value 1-12> - Enter the standard IP ACL number here. This value must be between 1 and
12.
edit_rule - Specifies to update a specified rule of a standard IP ACL.
<value 1-12> - Enter the standard IP ACL number here. This value must be between 1 and
12.
type - Specifies what action should be taken if a packet matches the rule's criteria. The
possible values are Permit or Deny.
deny - Specifies that the action that will take place, if a packet matches the rule's criteria, is
deny.
permit - Specifies that the action, that will take place, if a packet matches the rule's criteria,
is permit.
match_every - Specifies to match every packet. Valid values are true or false.
true - Specifies that every packet is considered to match the selected ACL Rule.
false - Specifies that it is not mandatory for every packet to match the selected ACL Rule.
srcip - Specifies the source IP address of the IP ACL rule.
<ipaddr> - Enter the source IP address, of the IP ACL rule, here.
srcmask - Specifies the source netmask of the IP ACL rule.
<netmask> - Enter the source netmask, of the IP ACL rule, here.
Restrictions
Only Administrators can issue this command.
Example
To create a new rule, for an existed IP standard ACL:
834