Delete Snmp - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
noauth_nopriv - Neither support packet authentication nor encrypting.
auth_nopriv - Support packet authentication.
auth_priv - Support packet authentication and encrypting.
<auth_string 32> - Authentication string. If the v1 or v2 is specified, the auth_string presents
the community string, and it must be one of the entries in community table. If the v3 is
specified, the auth_string presents the user name, and it must be one of the entries in the
user table.
Restrictions
Only Administrators can issue this command.
Example
To create SNMP host "10.0.0.1" with community string "public":
DWS-3160-24PC:admin# create snmp host 10.0.0.1 v1 public
Command: create snmp host 10.0.0.1 v1 public
Success.
DWS-3160-24PC:admin#

66-14 delete snmp

Description
This command is used to delete a recipient of an SNMP trap operation.
Format
delete snmp [host <ipaddr> | v6host <ipv6addr>]
Parameters
host - The IP address of the recipient for which the traps are targeted.
<ipaddr> - Enter the IP address used for the configuration here.
v6host - The IPv6 address of the recipient for which the traps are targeted.
<ipv6addr> - Enter the IPv6 address used for the configuration here.
Restrictions
Only Administrators can issue this command.
Example
To delete SNMP host "10.0.0.1":
615