D-Link DWS-3160-24TC Cli Reference Manual page 406

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
To enable ports 1-2 for manage address entry:
DWS-3160-24PC:admin#config lldp ports 5-6 mgt_addr ipv4 10.90.90.90 enable
Command: config lldp ports 5-6 mgt_addr ipv4 10.90.90.90 enable
Success.
DWS-3160-24PC:admin#
To configure exclude the system name TLV from the outbound LLDP advertisements for all ports:
DWS-3160-24PC:admin# config lldp ports all basic_tlvs system_name enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
DWS-3160-24PC:admin#
To configure exclude the vlan nameTLV from the outbound LLDP advertisements for all ports:
DWS-3160-24PC:admin# config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
DWS-3160-24PC:admin#
To configure exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements
for all ports:
DWS-3160-24PC:admin# config lldp ports all dot1_tlv_protocol_vid vlanid 1-3
enable
Command: config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Success.
DWS-3160-24PC:admin#
To configure exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DWS-3160-24PC:admin# config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Success.
DWS-3160-24PC:admin#
To configure exclude the protocol identity TLV from the outbound LLDP advertisements for all
ports:
402