D-Link DWS-3160-24TC Cli Reference Manual page 55

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
all - Specifies that all ports will be used.
mac_based - Configure the authentication as MAC based mode.
<portlist> - Enter the list of ports used for the configuration here.
all - Specifies that all ports will be used.
mac_address - (Optional) Specifies the MAC address of client.
<macaddr> - Enter the MAC address used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To initialize the authentication state machine on all the ports:
DWS-3160-24PC:admin# config 802.1x init port_based ports all
Command: config 802.1x init port_based ports all
Success.
DWS-3160-24PC:admin#
4-16 config 802.1x reauth
Description
This command is used to re-authenticate the device connected to the port. During the re-
authentication period, the port status will remain authorized until re-authentication failed.
Format
config 802.1x reauth [port_based ports [<portlist> | all] | mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
Parameters
port_based - Configure the authentication as port based mode.
<portlist> - Enter the list of ports used for the configuration here.
all - Specifies that all ports will be used.
mac_based - Configure the authentication as MAC based mode.
<portlist> - Enter the list of ports used for the configuration here.
all - Specifies that all ports will be used.
mac_address - (Optional) Specifies the MAC address of client.
<macaddr> - Enter the MAC address used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To re-authenticate the device connected to the port:
51