Show Loopdetect; Show Loopdetect Ports - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin# disable loopdetect
Command: disable loopdetect
Success.
DWS-3160-24PC:admin#
40-5

show loopdetect

Description
This command is used to display the LBD global configuration.
Format
show loopdetect
Parameters
None.
Restrictions
None.
Example
To display the LBD global settings:
DWS-3160-24PC:admin#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
Status : Disabled
Mode : VLAN-based
Interval : 20 sec
Recover Time : 0 sec
Trap State : None
Log State : Enabled
DWS-3160-24PC:admin#
40-6

show loopdetect ports

Description
This command is used to display the LBD per-port configuration.
416