D-Link DWS-3160-24TC Cli Reference Manual page 377

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
bound to MAC Y, and then it is conflict. When the DHCP snooping learned entry binds with the
static configured entry, and the DHCP snooping learned entry will not be created.
In a situation where the same IMPB pair has been statically configured, the auto-learned entry will
not be created. In a situation where the learned information is consistent with the statically
configured entry the auto-learned entry will not be created. In a situation where the entry is
statically configured in ARP mode the auto learned entry will not be created. In a situation where
the entry is statically configured on one port and the entry is auto-learned on another port, the
auto-learned entry will not be created.
Format
enable address_binding dhcp_snoop
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable DHCP IPv4 snooping mode:
DWS-3160-24PC:admin# enable address_binding dhcp_snoop
Command: enable address_binding dhcp_snoop
Success.
DWS-3160-24PC:admin#
34-10 disable address_binding dhcp_snoop
Description
This command is used to disable DHCP snooping mode. When the DHCP snooping function is
disabled, all of the auto-learned binding entries will be removed.
Format
disable address_binding dhcp_snoop
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
373