Show Wireless Network - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin#config wireless network 1 ip_tunnel state enable
Command: config wireless network 1 ip_tunnel state enable
Success.
DWS-3160-24PC:admin#
To configure the Layer 3 tunnel subnet and mask on Network 1:
DWS-3160-24PC:admin#config wireless network 1 ip_tunnel subnet 20.20.0.0 mask
255.255.0.0
Command: config wireless network 1 ip_tunnel subnet 20.20.0.0 mask 255.255.0.0
Success.
DWS-3160-24PC:admin#
89-4

show wireless network

Description
This command is used to display the network configuration parameters. If no parameter is
specified, a summary of the all the configured networks will be displayed.
Format
show wireless network {<int 1-64>}
Parameters
<int 1-64> - (Optional) Enter the Network ID here. This value must be between 1 and 64.
Restrictions
None.
Example
To display a summary of the configured networks:
797