D-Link DWS-3160-24TC Cli Reference Manual page 935

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin#show wireless wids_security
Command: show wireless wids_security
Rogue - admin configured Rogue AP's
Rogue - AP's on an illegal channel
Rogue - fake managed AP / invalid channel
Rogue - fake managed AP / no SSID
Rogue - managed AP / invalid SSID
Rogue - managed SSID / invalid security
Rogue - standalone AP / unexpected config
Rogue - unknown AP / managed SSID
Rogue - fake managed AP / managed SSID
Rogue - unmanaged AP on a wired network
Rogue detected trap interval
Wired network detection interval
AP De-Authentication Attack
DWS-3160-24PC:admin#
96-32 show wireless wids_security client
Description
This command is used to display the configured wireless WIDS security settings for a client.
Format
show wireless wids_security client
Parameters
None.
Restrictions
None.
Example
To display the WIDS client security configuration:
: Enable
: Enable
: Enable
: Enable
: Enable
: Enable
: Enable
: Enable
: Enable
: Enable
: 300 seconds
: 60 seconds
: Disable
931