D-Link DWS-3160-24TC Cli Reference Manual page 49

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin# config 802.1x fwd_pdu system enable
Command: config 802.1x fwd_pdu system enable
Success.
DWS-3160-24PC:admin#
4-8 config 802.1x fwd_pdu ports
Description
This command is used to configure the per port setting to control the forwarding of EAPOL PDU.
When the 802.1X functionality is disabled globally or for a port, and if the 802.1X forwarding PDU
is enabled, both globally and for the port, a received EAPOL packet on the port will be flooded on
the same VLAN to those ports for which the 802.1X forwarding PDU option is enabled and 802.1X
is disabled (globally or just for the port).
Format
config 802.1x fwd_pdu ports [<portlist> | all] [enable | disable]
Parameters
ports - Specifies a range of ports to be configured.
<portlist> - Enter the list of ports used for the configuration here.
all - Specifies that all the ports will be used.
enable - Enable forwarding EAPOL PDU receive on the ports.
disable - Disable forwarding EAPOL PDU receive on the ports. This is the default option.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the 802.1X forwarding PDU for ports 1 and 2:
DWS-3160-24PC:admin# config 802.1x fwd_pdu ports 1,2 enable
Command: config 802.1x fwd_pdu ports 1,2 enable
Success.
DWS-3160-24PC:admin#
4-9 config 802.1x authorization attributes
Description
This command is used to enable or disable the 802.1X authorization attributes. When authorization
is enabled for 802.1X RADIUS authentication, the authorized attributes assigned by the RADUIS
server will be accepted if the global authorization status is enabled.
45