Enable Pvid Auto Assign - D-Link DWS-3160-24TC Cli Reference Manual

Gigabit ehernet unified switch

Hide thumbs Also See for DWS-3160-24TC:

Table of Contents

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide

<portlist> - (Optional) Specifies a range of ports to be displayed.

If no parameter specified, system will display all ports gvrp information.

Restrictions

To display the 802.1Q port setting:

DWS-3160-24PC:admin#show port_vlan

Command: show port_vlan

CTRL+C ESC q

enable pvid auto assign

The command is used to enable the auto-assignment of PVID.

If this feature is enabled, the PVID will possibly be changed by the PVID or the VLAN configuration.

When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated

with VLAN X. The PVID is updated with the last item of the VLAN list. When a user removes a port

from the untagged membership of the PVID's VLAN, the port's PVID will be assigned with a

'default VLAN' parameter.

By default, this setting is enabled.

Ingress Checking

----------------

Acceptable Frame Type

---------------------------

Show Quick Links

Table of Contents

Dws-3160-24pc Dws-3160 series