Chapter 77 Trusted Host Command List - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide

Chapter 77 Trusted Host Command List

create trusted_host [<ipaddr> |<ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] {snmp | telnet | ssh | http | https | ping}
delete trusted_host [ipaddr <ipaddr> | ipv6address <ipv6addr> | network <network_address> |
ipv6_prefix <ipv6networkaddr> | all]
config trusted_host [<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] [add | delete] {snmp | telnet | ssh | http | https | ping | all}
show trusted_host
77-1 create trusted_host
Description
This command is used to create the trusted host. The Switch allows you to Specifies up to three IP
addresses that are allowed to manage the Switch via in-band SNMP or TELNET based
management software. These IP addresses must be members of the Management VLAN. If no IP
addresses are specified, then there is nothing to prevent any IP address from accessing the
Switch, provided the user knows the Username and Password.
When the access interface is not specified, the trusted host will be created for all interfaces.
Format
create trusted_host [<ipaddr> |<ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] {snmp | telnet | ssh | http | https | ping}
Parameters
<ipaddr> - Enter the IP address of the trusted host here.
<ipv6addr> - Enter the IPv6 address of the trusted host here.
network – Specifies the network address of the trusted network.
<network_address> - Enter the network address used here.
ipv6_prefix – Specifies that IPv6 prefix here.
<ipv6networkaddr> - Enter the IPv6 network address here.
snmp - (Optional) Specifies trusted host for SNMP.
telnet - (Optional) Specifies trusted host for TELENT.
ssh - (Optional) Specifies trusted host for SSH
http - (Optional) Specifies trusted host for HTTP
https - (Optional) Specifies trusted host for HTTPs.
ping - (Optional) Specifies trusted host for PING
Restrictions
Only Administrators and Operators can issue this command.
Example
To create the trusted host:
679