D-Link DWS-3160-24TC Cli Reference Manual page 434

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
DWS-3160-24PC:admin#create mac_based_access_control guest_vlan mbacv15
Command: create mac_based_access_control guest_vlan mbacv15
Success.
DWS-3160-24PC:admin#
42-8 delete mac_based_access_control
Description
This command is used to remove a MAC-based Access Control guest VLAN.
Format
delete mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid <vlanid 1-
4094>]
Parameters
guest_vlan - Specifies the name of the MAC-based Access Control's guest VLAN.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
guest_vlanid - Specifies the VID of the MAC-based Access Control's guest VLAN.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the MAC-based Access Control guest VLAN called 'mbacv15':
DWS-3160-24PC:admin# delete mac_based_access_control guest_vlan mbacv15
Command: delete mac_based_access_control guest_vlan mbacv15
Success.
DWS-3160-24PC:admin#
42-9 clear mac_based_access_control auth_state
Description
This command is used to clear the authentication state of a user (or port). The port (or the user)
will return to an un-authenticated state. All the timers associated with the port (or the user) will be
reset.
Format
clear mac_based_access_control auth_state [ports [all | <portlist>] | mac_addr <macaddr>]
430