Show Lldp Ports - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
ipv6 - (Optional) Specifies the IPv6 address used for the display.
<ipv6addr> - Enter the IPv6 address used for this configuration here.
Restrictions
None.
Example
To display management address information:
DWS-3160-24PC:admin#show lldp mgt_addr ipv4 10.90.90.90
Command: show lldp mgt_addr ipv4 10.90.90.90
Address 1 :
------------------------------------------------
Subtype
Address
IF Type
OID
Advertising Ports
DWS-3160-24PC:admin#
39-9

show lldp ports

Description
This command is used to display the LLDP per port configuration for advertisement options.
Format
show lldp ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a range of ports to be displayed.
If the port list is not specified, information for all the ports will be displayed.
Restrictions
None.
Example
To display the LLDP port 5 TLV option configuration:
: IPv4
: 10.90.90.90
: IfIndex
: 1.3.6.1.4.1.171.11.124.2
: 5-6
405