Show Ssh User - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Parameters
user - Specifies the user name.
<username 15> - Enter the user name used here. This name can be up to 15 characters long.
hostbased - Specifies user authentication method.
hostname - Specifies host domain name.
<domain_name 32> - Enter the domain name here. This name can be up to 32 characters
long.
hostname_IP - Specifies host domain name and IP address.
<domain_name 32> - Specifies host name if configuring Host-based method.
<ipaddr> - Specifies host IP address if configuring Host-based method.
<ipv6addr> - Specifies host IPv6 address if configuring Host-based method.
password - Specifies user authentication method.
publickey - Specifies user authentication method.
Restrictions
Only Administrators can issue this command.
Example
To update the user, called 'superuser', authentication method:
DWS-3160-24PC:admin#config ssh user superuser authmode publickey
Command: config ssh user superuser authmode publickey
Success.
DWS-3160-24PC:admin#
62-6

show ssh user

Description
This command is used to display the SSH user information.
Format
show ssh user authmode
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display user information about SSH configuration:
578