D-Link DWS-3160-24TC Cli Reference Manual page 851

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
128> | src_layer4_port [domain | echo | ftp | ftpdata | http | smtp | snmp | telnet | tftp | other
<int 0-65535>]]]]
Parameters
class_map - Specifies the name of an existing wireless DiffServ class.
<name 1-31> - Enter the existing wireless DiffServ class name here. This name can be up to
31 characters long.
rename - Specifies to change the name of a wireless DiffServ class.
<name 1-31> - Enter the existing wireless DiffServ class name here. This name can be up
to 31 characters long.
match - Specifies to configure a match criterion of a wireless DiffServ class.
ipv4 - Specifies that the Layer 3 protocol, for this class, is IPv4.
any - Specifies that all packets will be considered to belong to the class.
cos - Specifies the Class of Service value.
<value 0-7> - Enter the CoS value used here. This value must be between 0 and 7.
dstmac - Specifies the destination MAC address of a packet.
<macaddr> - Enter the destination MAC address of the packet here.
mask - Specifies the destination MAC mask of a packet.
<macmask> - Enter the destination MAC mask of the packet here.
dstip - Specifies the destination IP address of a packet.
<ipaddr> - Enter the destination IP address of the packet here.
dstmask - Specifies the destination IP mask of a packet.
<netmask> - Enter the destination IP mask of the packet here.
dst_layer4_port - Specifies the destination Layer 4 port of a packet, using a single
keyword or numeric notation.
domain - Specifies that the destination Layer 4 port of a packet will use the service
called Domain.
echo - Specifies that the destination Layer 4 port of a packet will use the service called
Echo.
ftp - Specifies that the destination Layer 4 port of a packet will use the service called
FTP.
ftpdata - Specifies that the destination Layer 4 port of a packet will use the service
called FTP Data.
http - Specifies that the destination Layer 4 port of a packet will use the service called
HTTP.
smtp - Specifies that the destination Layer 4 port of a packet will use the service called
SMTP.
snmp - Specifies that the destination Layer 4 port of a packet will use the service called
SNMP.
telnet - Specifies that the destination Layer 4 port of a packet will use the service called
TELNET.
tftp - Specifies that the destination Layer 4 port of a packet will use the service called
TFTP.
other - Specifies that a custom destination Layer 4 port number will be used.
<int 0-65535> - Enter the custom destination Layer 4 port number of a packet here.
This value must be between 0 and 65535.
ethertypekey - Specifies the value of the Ethertype.
appletalk - Specifies that the Ethertype value will be configured as Apple Talk.
arp - Specifies that the Ethertype value will be configured as ARP.
ibmsna - Specifies that the Ethertype value will be configured as IBM Systems Network
Architecture.
ipv4 - Specifies that the Ethertype value will be configured as IPv4.
ipv6 - Specifies that the Ethertype value will be configured as IPv6.
ipx - Specifies that the Ethertype value will be configured as IPX.
mplsmcast - Specifies that the Ethertype value will be configured as MPLS Multicast.
mplsuncast -Specifies that the Ethertype value will be configured as MPLS Unicast.
netbios - Specifies that the Ethertype value will be configured as NetBIOS.
rarp - Specifies that the Ethertype value will be configured as RARP.
847