Show Poe Ports - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Format
show poe system
Parameters
None.
Restrictions
None.
Example
To display the PoE system:
DWS-3160-24PC:admin#show poe system
Command: show poe system
PoE System Information
---------------------------------------------------
Power Limit
Power Consumption
Power Remained
Power Disconnection Method : Deny Low Priority Port
Detection Legacy PD
If Power Disconnection Method is set to deny next port, then the system can not
utilize out of its maximum power capacity. The maximum unused watt is 19W.
DWS-3160-24PC:admin#
55-4

show poe ports

Description
This command is used to display the configuration and actual values of the PoE port(s).
Format
show poe ports {<portlist>}
Parameters
<portlist> - (Optional) Specified a list of ports to be displayed.
If no parameter specified, the system will display the status for all ports.
Restrictions
None.
: 250(Watts)
: 0(Watts)
: 250(Watts)
: Disabled
533