D-Link DWS-3160-24TC Cli Reference Manual page 479

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
46-12 config mld_snooping multicast_vlan forward_unmatched
Description
This command is used to configure the forwarding mode for MLD multicast VLAN unmatched
packets. When the Switch receives an MLD snooping packet, it will match the packet against the
multicast profile to determine which multicast VLAN to associate with it. If the packet does not
match all the profiles, the packet will be forwarded or dropped based on this configuration.
Format
config mld_snooping multicast_vlan forward_unmatched [disable | enable]
Parameters
enable – Specifies that the packet will be flooded on the VLAN.
disable – Specifies that the packet will be dropped. This is the default option.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the forwarding mode for MLD multicast VLAN unmatched packets:
DWS-3160-24PC:admin#config mld_snooping multicast_vlan forward_unmatched enable
Command: config mld_snooping multicast_vlan forward_unmatched enable
Success.
DWS-3160-24PC:admin#
46-13 show mld_snooping multicast_vlan
Description
This command is used to display information for an MLD snooping multicast VLAN.
Format
show mld_snooping multicast_vlan {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the multicast VLAN name here. The VLAN name can be up
to 32 characters long.
If no parameter is specified, then all MLD snooping multicast VLAN entries will be displayed.
Restrictions
None.
475