Sscclk Clock Group; Figure 113. Sscclk Clock Topology; Table 86. Sscclk Clock Routing Constraints - Intel 852GM Design Manual

R
11.2.7.

SSCCLK Clock Group

The 48/66-MHz SSCCLK operates independently and is not length tuned to any other clock. This clock
employs a spread-spectrum device in its path to reduce EMI. The overall clock path is divided into two
segments as shown in Figure 113, with each segment series terminated and routed point to point.

Figure 113. SSCCLK Clock Topology

CK408

Table 86. SSCCLK Clock Routing Constraints

Class Name
Class Type
Topology
Reference Plane
Single Ended Trace Impedance ( Zo )
Nominal Inner Layer Trace Width
Nominal Outer Layer Trace Width
Minimum Spacing (see exceptions below)
Maximum Via Count
Series Termination Resistor Value
Trace Length Limits – L1
Trace Length Limits – L2
Trace Length Limits – L3
Trace Length Limits – L4
Total Length Range – L1 + L2 + L3 + L4
Length Matching Required
Breakout Exceptions
®
Intel 852GM Chipset Platform Design Guide
Rs
L1
L3
Parameter
Platform Clock Routing Guidelines
L2 SSC
Rs
L4
SSCCLK
Individual Net
Series Terminated Point to Point
Ground Referenced
55 Ω ±15%
4.0 mils
5.0 mils (pin escapes only)
20 mils
4 (per driver/receiver path)
33 Ω ± 5 %
Up to 500 mils
1.0" to 4.0"
Up to 500 mils
1.0" to 7.0"
3.0" to 8.5"
No
5 mil trace with 5 mil space on outers
4 mil trace with 4 mil space in inners
Maximum breakout length is 0.3"
GMCH
Definition
207