Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
show Commands
show ip ospf
show ipv6 ospf
294
Example 1
host1#undebug ip ospf adj
Example 2
host1#undebug ipv6 ospf lsa
There is no no version.
See undebug ip ospf
See undebug ipv6 ospf
The show commands provide information about the following OSPFv2 and OSPFv3
items:
Routing processes
Border routers
Database
Interfaces
Neighbors
Traffic
Virtual links
Internal statistics
MPLS tunnels and opaque LSAs
You can use the output filtering feature of the show command to include or exclude lines
of output based on a text string you specify. See JunosE System Basics Configuration
Guide, for details.
Use to display general information about OSPF routing processes.
Field descriptions
Routing Process—Process ID, router ID, domain ID
OSPF administrative state—Enabled or disabled
OSPF operational state—Enabled or disabled
Incremental External SPF—On or off
Graceful Restart Capability—On or off
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
