Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 Configuration Manual page 110

JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
86
discards—Number of packets that could not be routed that were discarded
ICMP Statistics Rcvd:
errors—Error packets received
dst unreach—Packets received with destination unreachable
time exceed—Packets received with time-to-live exceeded
param probs—Packets received with parameter errors
src quench—Source quench packets received
redirect—Receive packet redirects
echo req—Echo request (ping) packets
echo rpy—Echo replies received
timestamp req—Requests for a timestamp
timestamp rpy—Replies of timestamp requests
addr mask req—Mask requests sent
addr mask rpy—Mask replies sent
ICMP Statistics Sent:
errors—Error packets sent
dst unreach—Packets sent with destination unreachable
time excd—Packets sent with time-to-live exceeded
param probs—Packets sent with parameter errors
src quench—Source quench packets sent
redirect—Send packet redirects
timestamp req—Requests for a timestamp
timestamp rpy—Replies to timestamp requests
addr mask req—Address mask requests
addr mask rpy—Address mask replies
ARP spoof checking—Status of the check for spoofed ARP packets received on an
IP interface, enabled or disabled. This field is not displayed when you use the detail
keyword.
In Received Packets, Bytes—Total number of packets and bytes received on the IP
interface
Copyright © 2010, Juniper Networks, Inc.