JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
show clns
392
LSPID
LSP Seq Num
rtr1.00-00*
0x00000009
rtrtwo.00-00
0x00000005
IS-IS Level-2 Link State Database
LSPID
LSP Seq Num
rtr1.00-00*
0x00000010
rtrtwo.00-00
0x0000000C
host1#clear isis database
host1#show isis database
IS-IS Level-1 Link State Database
LSPID
LSP Seq Num
IS-IS Level-2 Link State Database
LSPID
LSP Seq Num
There is no no version.
See clear isis database
Use to display global CLNS information about the router.
Field descriptions
Interfaces Enabled for CLNS—Number of interfaces that have the CLNS routing
protocol enabled
Configuration Timer—Interval (in seconds) after which the router sends out IS hello
packets
Default Holding Timer—Length of time (in seconds) that hello packets are
remembered
Packet Lifetime—Default value used in packets sourced by this router
Intermediate system operation enabled (forwarding allowed)—Indicates whether
this router is configured to be an ES or an IS
IS-IS Level-1-2 Router—Shows whether IS-IS is running in this router, gives tag
information, and shows whether it is running level 1 or level 1-2
Routing for Area—ISO (NSAP) address for the network
Distribute domain wide enabled—Indicates whether distribute-domain-wide is
enabled
Area Authentication—Displays the following fields if area authentication is enabled:
PSNP/CSNP PDU authentication enabled—Indicates whether authentication of
level 1 PSNP packets and/or level 1 CSNP packets has been enabled by means of
the area-authentication command
Key-id—Numeric identifier for the authentication key
Type—Type of authentication: hmac-md5 or password; an asterisk after the type
indicates that the key is active
LSP Checksum
LSP Holdtime
0x568F
1188
0xEC9B
444
LSP Checksum
LSP Holdtime
0xF630
1193
0xF8DA
1188
LSP Checksum
LSP Holdtime
LSP Checksum
LSP Holdtime
Copyright © 2010, Juniper Networks, Inc.
ATT/P/OL
0/0/0
0/0/0
ATT/P/OL
0/0/0
0/0/0
ATT/P/OL
ATT/P/OL
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 and is the answer not in the manual?
Questions and answers