Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
tcp resequence-buffers default-vr-maximum
tcp resequence-buffers vr-maximum
tcp resequence-buffers connection-maximum
144
Use to specify a router-wide maximum number of buffers that resequencing queues
can contain.
Specify a value of zero (0) to turn off the limit.
Example
host1(config)#tcp resequence-buffers global-maximum
Use the no version to revert the global maximum buffer value to its default, 1000
buffers.
See tcp resequence-buffers global-maximum
Limiting Buffers per Virtual Router
The tcp resequence-buffers vr-maximum command and tcp resequence-buffers
default-vr-maximum command allow you to limit the number of outstanding buffers
on existing or newly established virtual routers.
Use to specify the default buffer limit assigned to all virtual routers when the virtual
router is established.
Specify a value of zero (0) to turn off the limit assignment.
Example
host1(config)#tcp resequence-buffers default-vr-maximum 200
Use the no version to revert the virtual router maximum value to its default, 100 buffers.
See tcp resequence-buffers default-vr-maximum
Use to define the maximum number of buffers that the current or specified virtual
router can use.
Specify a value of zero (0) to turn off the limit assignment.
Example
host1(config)#tcp resequence-buffers vr-maximum
Use the no version to revert the virtual router maximum value to its default, 100 buffers.
See tcp resequence-buffers vr-maximum
Limiting Buffers per Connection
The tcp resequence-buffers connection-maximum command and tcp
resequence-buffers default-connection-maximum command allow you to limit the
number of outstanding buffers on existing or newly established connections.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
