show ip ospf virtual-links
Copyright © 2010, Juniper Networks, Inc.
Example
host1#show ipv6 ospf traffic
OSPFv3 Statistics:
Rcvd: 249 total, 0 checksum errors
242 hello, 2 database desc, 1 link state req
4 link state updates, 1 link state acks
Sent: 251 total, 0 pkts dropped
242 hello, 3 database desc, 1 link state req
4 link state updates, 1 link state acks
LSA discard count: 0
See show ipv6 ospf traffic
Use to display the parameters and the current state of OSPF virtual links.
Field descriptions
Virtual link to router—OSPF neighbor and the current state of the virtual link
Transmit Delay—Time (in seconds) between transmissions from the specified
interface
Timer intervals—Timer intervals (in seconds) configured for the link: Hello, Dead,
and Retransmit
Example
host1#show ip ospf virtual-links
Virtual link to router 192.168.1.13 in state POINT-TO-POINT
Transmit Delay is 1 sec
Timer intervals configured, Hello 10 sec, Dead 40 sec, Retransmit 5 sec
See show ip ospf virtual-links
Chapter 5: Configuring OSPF
315