Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
102
Call to listen()—8-bit value indicating how the call went
Call to accept()—8-bit value indicating how the call went
Call to bind()—8-bit value indicating how the call went
Call to connectto()—8-bit value indicating how the call went
Call to rsAccept()—8-bit value indicating how the call went
Call to sobind()—8-bit value indicating how the call went
Call to solisten()—8-bit value indicating how the call went
Call to soclose()—8-bit value indicating how the call went
Call to soabort()—8-bit value indicating how the call went
Call to soaccept()—8-bit value indicating how the call went
Call to soconnect()—8-bit value indicating how the call went
Call to soconnect2()—8-bit value indicating how the call went
Call to sodisconnect()—8-bit value indicating how the call went
Call to soshutdown()—8-bit value indicating how the call went
Call to sowakeup()—8-bit value indicating what kind of wakeup it is. 1 (SELREAD)
indicates that data is available on the socket for the application. 2 (SELWRITE)
means that more buffer space is available and the application can queue up more
data to be transmitted.
Call to soclose()—8-bit value indicating how the call went
Call to sendto()—16-bit value indicating the return status
Call to write()—16-bit value indicating the return status
Call to sendmsg()—16-bit value indicating the return status
Call to send()—16-bit value indicating the return status
Call to recvfrom()—16-bit value indicating the return status
Call to recv()—16-bit value indicating the return status
Call to recvmsg()—16-bit value indicating the return status
Call to read()—16-bit value indicating the return status
Example 1
host1#show ip socket statistics
5 10.13.5.70:23 --> 10.10.132.71:2000
type: 1 (SOCK_STREAM)
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
