Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Always compare MED—Status of always compare MED
Compare MED within confederation—Status of compare MED within a confederation
Advertise inactive routes—Status of Advertise inactive routes
Advertise best external router to internal peers—Status of Advertise best external
router to internal peers
Enforce first AS—Status of Enforce first AS
Missing MED as worst—Status of Missing MED as worst
Route flap dampening—Status of route dampening
Log neighbor changes—Status of Log neighbor changes
Fast External Fallover—Status of Fast External Fallover
Maximum received AS-path length—Maximum AS-path length received
BGP administrative distances—External, internal, and local BGP administrative
distances
Client-to-client reflection—Whether client-to-client reflection is configured
Cluster ID—Cluster IDs
Route-target filter—Status of Route-target filter
Default IPv4-unicast—Status of Default IPv4-unicast
Local-RIB version—RIB version
Local-FIB version—FIB version
Neighbor(s)—BGP neighbors (if configured)
Networks for which routing is occurring
Aggregate Generation for Unicast Routes
Example 1
host1#show ipv6 protocols
Routing Protocol is
Local router ID 1.1.1.1, local AS 100
Administrative state is Start
Operational state is Up
Shutdown in overload state is disabled
Default local preference is 100
IGP synchronization is enabled
Default originate is disabled
Auto summary is enabled
Always compare MED is disabled
Compare MED within confederation is disabled
Advertise inactive routes is disabled
Advertise best external route to internal peers is disabled
bgp 100"
Chapter 2: Configuring IPv6
171
Advertisement
Table of Contents
