Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE 2010-10-31 Configuration Manual page 322

JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
show ip ospf database
show ipv6 ospf database
298
10.0.0.11
10.0.0.11
OSPF Autonomous System Border Routers
Destination
10.1.1.4
10.1.1.5
See show ip ospf border-routers
See show ipv6 ospf border-routers
Use to display the full IP OSPF database, a summary of the database, or LSAs specific
to the given area.
Field descriptions
Link ID—Link-state ID of the LSA; for OSPFv2:
For router links, set to the router's OSPF router ID
For network links, set to the IP interface address of the network's designated router
For type 3 summary LSAs, set to an IP network number
For type 4 summary LSAs, set to an AS boundary router ID
For type 5 externals, set to an IP network number
Link ID—Link-state ID of the LSA; for OSPFv3:
For link LSAs, set to the interface ID
For network links, set to the interface ID
For router links, set to integer
For intra-area prefix links, set to integer
For interarea prefix links, set to integer
For interarea router links, set to integer
For external links, set to integer
For grace links, set to integer
ADV Router—ID of the advertising router
Age—Link-state age
Seq#—Link-state sequence number (detects old or duplicate LSAs)
Checksum—Fletcher checksum of the complete contents of the LSA
FE80::4 ATM4/0.41
FE80::5 ATM4/1.48
NEXT_HOP Interface
FE80::3 ATM4/1.39
FE80::4 ATM4/0.41
Copyright © 2010, Juniper Networks, Inc.
INTRA 0.0.0.0
INTRA 100.0.0.1
RouteType Area
INTER 0.0.0.0
INTER 0.0.0.0