Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Use to display detailed or summary information for a particular IPv6 address or interface
or for all interfaces.
The default for the show ipv6 interface command is all interface types and all
interfaces.
Use brief or detail keywords with the show ipv6 interface command to display different
levels of information.
Field descriptions
Description—Optional description for the interface or address specified
Network Protocols—Network protocols configured on this interface
Link local address—Local IPv6 address of this interface
Internet address—External address of this interface
IPv6 statistics Rcvd:
local destination—Frames with this router as their destination
hdr errors—Number of packets containing header errors
addr errors—Number of packets containing addressing errors
unkn proto—Number of packets received containing unknown protocols
discards—Number of discarded packets
IPv6 statistics Sent:
generated—Number of packets generated
no routes—Number of packets that could not be routed
discards—Number of packets that could not be routed that were discarded
ICMPv6 statistics Rcvd:
total—Total number of received packets
errors—Error packets received
destination unreach—Packets received with destination unreachable
admin unreach—Packets received because the destination was administratively
unreachable (for example, the packet encountered a firewall filter)
parameter problem—Packets received with parameter errors
time exceeded—Packets received with time-to-live exceeded
pkt too big—Number of packet-too-big messages received that indicate a packet
was too large to forward because of the allowed MTU size
redirects—Received packet redirects
Chapter 2: Configuring IPv6
151
Advertisement
Table of Contents
