Table of Contents
Advertisement
JunosE 11.3.x IP, IPv6, and IGP Configuration Guide
clear ipv6 ospf counters
clear ipv6 ospf process
clear ip ospf database
274
Number of active areas in this router is 1
1
normal, 0 stub, 0 NSSA.
host1#baseline ip ospf
host1#show ip ospf delta
Routing Process OSPF 1 with Router ID 5.106.7.1
OSPF Statistics:
Rcvd: 0 total, 0 checksum errors
0 hello, 0 database desc, 0 link state req
0 link state updates, 0 link state acks
Sent: 0 total, 0 pkts dropped
0 hello, 0 database desc, 0 link state req
0 link state updates, 0 link state acks
Supports only single TOS(TOS0) routes
SPF schedule delay 0 secs, Hold time between two SPFs 3 secs
Maximum path splits 1
Area BACKBONE(0.0.0.0)
Area is a transit area
SPF algorithm executed 425 times
ABR count 0
ASBR count 1
LSA Count 12
Number of interfaces in this area is 24
Area ranges are:
Number of active areas in this router is 1
1
normal, 0 stub, 0 NSSA.
There is no no version.
See baseline ip ospf
See baseline ipv6 ospf
Use to clear all OSPF IPv6 statistical counters for the virtual router.
Example
host1#clear ipv6 ospf counters
There is no no version.
See clear ipv6 ospf counters
Use to clear the OSPF IPv6 process on the virtual router.
Example
host1#clear ipv6 ospf process
There is no no version.
See clear ipv6 ospf process
Use to delete all entries from the OSPF link-state database and to reset all adjacencies.
Example
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
